Avocet Affinity Ultra 12 Inch Stainless Steel Letterbox

Affinity Ultra Letter Box 12" 318mm Stainless Steel Letter Plate Set UPVC Door

The Avocet Affinity Ultra is an exceptional quality 12" letter box combining a modern styling with superior corrosion resistance. It not only looks stunning but the body and flaps are constructed from 304 Stainless Steel perfect for coastal regions where corrosion can be an issue.

This fabulous 12" letter box is manufactured to take full A4 size mail with an external flap that opens to 180°. Each flap is fully spring loaded and comes with a finger ridge for easy opening. The Affinity contains both external and internal weather and draught seals, these coupled with an internal nylon brush provide outstanding protection against weather ingress.

Features:

• Material: 304 Stainless Steel flaps and body
• 12" version to take full A4 size mail
• External flap opens up to 180°
• Fully sprung loaded
• Finger ridge for easy opening
• Contains both external and internal weather and draught seals
• Internal nylon brush seal to help prevent draughts and weather ingress
• Supplied with two lengths of fixing screws
• Performance: tested (flap) to 50,000 operations
• Aperture size conforms to requirements of BS EN 13724:2002
• Coating exceeds the requirements of BS EN 1670: 2007 – Grade 5

What's in the pack?

1 x Affinity Ultra 12" Letter Box

4 x Screws (2 x 55mm, 2 x 85mm)

Dimensions:

• External Dimensions: 318mm in length x 66mm in height
• Internal Dimensions: Sleeve size - 262mm x 43mm (minimum sized hole in the door that the letter box will fit)
• Distance between screw hole centres: 270mm
• Fits door from 40mm to 80mm thick

Measuring Guide:

First remove your letterbox by lifting the flaps and unscrewing the fixing screws or bolts. Once the letter box is removed measure the exact width and height of the aperture (hole) and check the the sizes against the diagram in the gallery. Measure the door mid rail - panel thickness to determine the letter box thickness needed (i.e. 40/80mm). You may well find there are a few millimetres difference to your existing letter box, the door mid-rail or panel aperture can easily be trimmed using a hacksaw or similar.