Greenteq Coastline 12 Inch Stainless Steel Letterbox

Greenteq Coastline Stainless Steel 12" Inch (325mm) Letterbox

The Greenteq Coastline stainless steel letterbox features a timeless style, utilising gentle lines and soft curves to create an elegant letter box that is a cut above the rest. These letterboxes are stylishly elegant and because they are constructed from grade 304 stainless steel they also provide excellent resistance to corrosion. The Coastline range from Greenteq is suited with their stainless steel knockers and stainless steel lever/lever front door handles and is also interchangeable with standard Greenteq door furnishings.

Sculptured recesses on the lower frame allow easy finger access and both flaps open to a full 180° preventing accidental damage through shearing or over stressing of the stainless steel springs. With soft internal brushes and external seal, this letter box provides excellent draught and water protection. The Coastline is solidly constructed from grade 304 stainless steel, very robust and corrosion tested up to 1000 hours. You can choose to mount the letter box by using the Thru Fix screws provided or simply attach it to the face of your door by using the correct length screws suited to your door type.

Features:

• Grade 304 austenitic stainless steel flaps for exceptional corrosion resistance
• Suits 42mm to 80mm mid rails
• Both flaps open to a full 180°
• Hard wearing stainless steel springs ensure positive opening and closing for years to come
• Sculpted recesses for easy opening
• Draught proofing and integral brush provide full weather proofing
• Supplied with thru-fix screws or can be surface fixed
• Over 1000 hours corrosion resistance (tested in accordance with BS EN 1670)

What's in the pack?

1 x External flap and surround with draught seal

1 x Internal flap and surround with fitted brushes

4 x Fixing screws (2 different lengths).

Dimensions:

• External Dimensions: 325mm in length x 78mm in width
• Internal Dimensions: Sleeve size - 256mm x 52mm (minimum sized hole in the door that the letter box will fit).
• Distance between screw holes: 275mm

Measuring Guide:

First remove your letterbox by lifting the flaps and unscrewing the fixing screws or bolts. Once the letter box is removed measure the exact width and height of the aperture (hole) and check the sizes against the diagram in the gallery. Measure the door mid rail - panel thickness to determine the letter box thickness needed (i.e. 20/40mm or 40/80mm). You may well find there are a few millimetres difference to your existing letter box, the door mid-rail or panel aperture can easily be trimmed using a hacksaw or similar.