Replacement handles for 95mm PZ locks, including ERA Vectis. 95mm PZ (95PZ) uPVC door handles are used on compatible 95mm PZ multipoint locks, including some Millenco and ERA Vectis systems. The PZ measurement is taken from the centre of the handle spindle to the centre of the key cylinder, and it must match your lock for the handle to work.
Once you've confirmed 95mm PZ, check the screw fixing centres and handle type. Screw centres in our current 95mm PZ range include 122mm, with handles from ERA. Not sure? Use our uPVC Door Handle Finder.
From the centre of the square spindle to the centre of the keyhole (cylinder). It should measure 95mm.
From the centre of the top fixing screw to the centre of the bottom one, measured on the inside handle. Match this as well as the PZ.
Lever/lever has a handle on both sides. Lever/pad has a pad outside (either fixed or movable via an offset/split spindle), so the door can only be opened from outside with the key.
Check the backplate length and width covers the old fixing marks, and whether your lock uses a single or split spindle.
PZ is the distance between the centre of the handle spindle and the centre of the cylinder (keyhole). It is set by the multipoint lock in your door, so a handle with a different PZ won't line up with the lock. 92mm is the most common PZ on uPVC doors; 95mm PZ is one of the less common sizes, so measure carefully.
With the door open, undo the fixing screws on the inside handle and pull both handles and the spindle out. Fit the new spindle and handles, tighten the screws evenly, and check the handle springs back and the door locks with the door open before you close it.
Only if the screw fixing centres and handle type also match. Two handles can share the same PZ but have different fixing positions.
No. The PZ must match the lock fitted in your door. If you can't find the right handle, check our repair door handles, which have adjustable fixings for older doors.
Many uPVC door handles are reversible, but not all. Check the individual product listing before ordering.
Other PZ sizes: 92mm PZ 68mm PZ 70mm PZ 47–48mm PZ 72mm PZ 117mm PZ. Or browse all uPVC door handles.
Not sure of your PZ or screw centres? Send us a photo of your handle with a tape measure alongside and we'll identify it for you.
Send us a photo to identify your partMonday to Friday, 8:30–12:30 and 13:00–15:30
