Fab & Fix UPVC Door Handle Pair 92mm PZ 211mm Fixing Centres

Heavy Duty Door Handle 92PZ 92mm 211mm Screw Fixing Centres Lever/Lever Fab & Fix Heritage

The Heritage Door handle by Fab & Fix has been especially styled to provide an elegant look for traditional styled doors. Its sculpted ergonomic lever allows for ease of use and enhanced smooth action, while its solid die cast construction and heavy duty spring cassette, adds durability. It has a wide backplate to accommodate cylinder guards and comes fully assembled with care instructions to help you to keep the handle in an optimal condition.

This handle suits doors of a thickness between 44mm - 70mm.

Features:

• Suits traditional styled doors
• Solid die cast construction
• Heavy duty spring cassette
• Wide backplate to accommodate cylinder guards
• Fully assembled
• Care instructions included
• Suits doors with a thickness of 44mm - 70mm
• Tested to meet the requirements of PAS 24 as part of a compliant door se
• Endurance tested in excess of 50,000 cycles
• Meets the requirements of BS EN 1670:2007 Grade 5 (480 hours) Corrosion Resistance

What's in the pack?

1 x Fab & Fix Heritage Door Handle

1 x 125mm Spindle

1 x 110mm Spindle

2 x 80mm Screws

2 x 55mm Screws

Dimensions

• PZ Centres: 92mm
• Spindle Size: 8mm
• Backplate width: 32mm
• Backplate depth: 12mm
• Backplate length: 240 mm
• Distance between screw hole centres: 211mm

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 215 mm) and the distance from the centre of the handle spindle to the centre of the barrel (this handle measures 92mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An un-sprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.