Fab & Fix Balmoral UPVC Door Handle Pair 92mm PZ 211mm Fixings

Upvc Door Handle 92mm 92PZ 211mm Screw Fixing Centres Lever/Lever Balmoral Fab & Fix

The Balmoral lever/lever door handle set comes with a high quality finish that is made to endure giving you years of use. The sprung levers are fixed to the backplate and by design the handles are fully reversible. Fixing lugs are supplied on both backplates for a secure fit. Supplied with fixing screws, fitted return springs and spindle to suit door thickness 58mm to 72mm.

You may want to update your existing cylinder locks at the same time as replacing your handle. A range of locks are available from our shop to suit all budgets including Anti Snap, Anti Bump, Keyed Alike & Thumb Turns.

Features:

• Universal handing, levers are fully reversible by design
• Sprung version as standard
• Supplied as a pair complete with spindle and screws
• Compatible with Yale and Paddock Door Locks
• Tested to over 200,000 cycles

What's in the pack?

1 x Set of Balmoral 92PZ Lever Handles

1 x Spindle

1 x Packet Fixing Screws

Dimensions:

• PZ Centres: 92mm
• Backplate width: 32mm
• Backplate length: 243mm
• Lever length: 120mm
• Distance between screw hole centres: 211mm
• For doors from 58 - 72mm thick
• Spindle Size: 8mm

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 211mm) and the distance from the centre of the handle spindle to the centre of the barrel (this handle measures 92mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

Important please check the critical measurements in the diagram in the gallery before ordering.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An un-sprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.