Greenteq Omega New 12 inch Heavy Duty Letterbox V2

12 Inch Letter Box Front Door Letter Plate Set Heavy Duty Metal Sprung V2

The next evolution of Greenteq Omega letter boxes for doors features a 12" inch, sprung, metal box that is perfect for all door types. This front door letter box features a timeless styling utilising luxurious lines and soft curves to create an elegant letter box that is a cut above the rest.

Sculptured recesses on the lower frame allow easy finger access and both of the convex curved metal flaps open to nearly 180° preventing accidental damage through over stressing of the springs. The frame ends are also in metal echoing the same curvaceous lines of the flaps. With a soft internal brush seal and an external foam seal, this replacement letter box provides not only excellent draught and water protection, but will stop letterbox rattling in windy conditions. The Omega letter box is solidly constructed, very robust and salt tested to exceed 480 hours on all finishes.

Features:

• Solid frame construction
• Suitable for doors with a 40 to 80mm mid rail thickness
• Fixings are provided to fit doors from 40 to 72mm
• For doors 73mm to 80mm please source alternative screws
• Sprung all metal flaps, near 180° flap opening both sides
• Cushioned closing action - stop letterbox rattling
• Sculpted recesses for easy opening
• Soft Nylon brush seal to inside and foam seal to external flap
• Supplied with thru-fix screws
• Weather performance and endurance tested to BS EN 13724 minimum of 20,000 open/close cycles
• Salt tested to exceed 480 hours BS EN 1670 Grade 5 on all finishes

What's in the pack?

1 x Metal external flap and surround with weather seal

1 x Metal internal flap and surround with fitted brush

4 x Fixing Screws (2 different lengths)

Measuring Guide:

First remove your letterbox by lifting the flaps and unscrewing the fixing screws or bolts. Once the letter box is removed measure the exact width and height of the aperture (hole) and check the the sizes against the diagram. Measure the door mid rail - panel thickness to determine the letter box thickness needed (i.e. 20/40mm or 40/80mm) this box is available for 40/80mm thicknesses. You may well find there are a few millimetres difference to your existing letter box, the door mid-rail or panel aperture can easily be trimmed using a hacksaw or similar.

Dimensions:

• External Dimensions: 326mm in length x 79mm in width
• Internal Dimensions: Sleeve size - 250mm x 39mm (minimum sized hole in the door that the letter box will fit 259 x 48mm).
• Distance between screw holes: 270mm