Fab & Fix Blenheim UPVC Door Handle Pair 92mm 62mm PZ 240mm Fixings Lever Pad

UPVC Door Handle Set 92PZ 92mm 62PZ 62mm Offset Lever Pad 240mm Fix Fab & Fix Blenheim

The BLENHEIM lever/pad door handle set comes with a high quality finish that is made to endure, giving you years of use. This Sprung lever/pad handle set has been designed to be fully reversible to fit both left or right hung doors. The return spring cassettes are fitted over the spindle hole, ensuring that the handle is held at 90° with no sag. Offset lever pad handles are commonly used to restrict access from the outside (without needing to lock the door from the inside), making entry only possible by using a key.

The sprung lever and pad are fixed to the backplate and fixing lugs are supplied on both backplates for a secure fit. The handle set comes with fixing screws, fitted return springs and two spindles to suit door thickness up to 72mm.

You may want to update your existing cylinder locks at the same time as replacing your handle. A range of locks is available from our shop to suit all budgets including Anti Snap, Anti Bump, Keyed Alike & Thumb Turns.

Features:

• Universal handing, levers are fully reversible by design
• Sprung version as standard
• Supplied as a pair complete with spindle and screws
• Tested to over 200,000 cycles

What's in the pack?

1 x Set of Blenheim 92PZ Lever Pad Handles

2 x Spindles

1 x Pack Fixing Screws

Dimensions:

• PZ Centres: 92mm & 62mm
• Backplate width: 29.5mm
• Backplate length: 270mm
• Lever length: 120mm
• Pad length: 74mm
• Distance between screw hole centres: 240mm
• For doors from 58 - 72mm thick
• Spindle Size: 8mm

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 240mm) and the distance from the centre of the handle/pad spindle to the centre of the barrel (this handle measures 92mm/62mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

Important please check the critical measurements in the diagram in the gallery before ordering.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An un-sprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.