Yale Superior UPVC Door Handle Set 92mm Lever Pair 215mm Fixings 245mm Backplate

From a name you can trust - the Yale Superior lever/lever door handle set comes with a high quality finish that is made to endure, giving you year upon year of dependable use. This Sprung lever/lever handle set is manufactured in aluminum and is designed to be fully reversible to fit both left or right hung doors. The return springs are fitted over the spindles, ensuring the handle is held at 90° with no sag. Fixing lugs are supplied on both backplates for a secure fit and M6 stainless steel screws for improved strength and security.

You may want to update your existing cylinder locks at the same time as replacing your handle. A range of locks is available from our shop to suit all budgets including Anti Snap, Anti Bump, Keyed Alike & Thumb Turns.

Features:

• Supplied as a pair complete with 2 spindles
• M6 stainless steel screws for improved strength and security
• Universal handing, levers are fully reversible by design
• Available in powder coated and anodised finishes
• Aluminum construction
• Supplied with fixings for PVCu, Wood and Composite doors
• Corrosion tested to BS EN 1906:2010 Grade 4, (240hrs. NSST)
• Endurance tested to 200,000 cycles

What's in the pack?

1 x Set of Yale Superior 92PZ Lever Door Handles

2 x Spindles & Spring Cassettes

4 x M6 Stainless Steel Screws

Dimensions:

• PZ Centres: 92mm
• Backplate width: 32mm
• Backplate length: 245mm
• Backplate depth: 14mm
• Lever length: 118mm
• Distance between screw hole centres: 215mm
• To suit door thickness: 44 - 70mm
• Spindle Size: 8mm

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 215mm between screw holes) and the distance from the centre of the handle spindle to the centre of the keyhole (this handle measures 92mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

Important please check the critical measurements in the diagram in the gallery before ordering.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An un-sprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.

Fitting Instruction:

1. Remove your old door handle.

• Open your door and remove the 2 screws on the internal side of the door handle.
• Pull the internal and external door handles apart and remove the spindle (the metal bar that joins the 2 handles together).
• Keep the door open ready to fit your replacement door handles.

2. Check your spindle and screw length.

• The spindle and screws supplied in this pack are for PVCu doors (60-70mm thick). If you are fitting this handle to a composite or wooden door (44mm thick) you will need a hacksaw to reduce the length of the spindle and screws supplied..

3. Fitting your new door handle.

• Identify the external handle from the internal handle - the internal handle will have 2 screw holes in the backplate. It is important that the screw heads are on the internal side of the door so the handles cannot be removed from the outside of the property.
• Move the handle to the correct position (for a right handed or left handed door).
• Insert the spindle supplied in to the external handle and place the spring cassette over the spindle so that it sits within the back plate of the handle.
• Position the external handle in place on the door with the spindle fitted through the door. Place the second spring cassette over the spindle on the internal side of the door and push the internal back plate in to place.
• Place the 2 screws supplied through the screw holes on the back plate of the internal door handle and secure in to place.
• Check the operation of the handle before closing the door.