White Stormguard Replacement Gasket UPVC Seal Universal Draught Excluder Windows

Wave goodbye to draughty, energy-draining UPVC windows and doors with the Stormguard Universal UPVC Replacement Seal! Are you tired of battling with worn or failing gaskets that have lost their flexibility, shrunk, or even begun to disintegrate over time? Look no further! This remarkable seal is engineered to snugly fit virtually all UPVC frames, promising an end to those pesky leaks and draughts. Not only will it revitalize the efficiency of your windows and doors, but it'll also save you money and energy in the long run.

When you order multiple 1m lengths of this versatile gasket, we'll send it as one continuous length, wherever possible, to make your DIY experience smoother and more seamless.

Features:

• Universal design fits almost all UPVC frames
• Effectively seals against draughts and leaks
• Restores energy efficiency, saving you money
• High-quality material resists shrinking and disintegration
• Supplied in continuous lengths for larger projects

What's in the pack?

Stormguard Universal UPVC Replacement Seal in your chosen length

Dimensions:

Please refer to size chart.

Installation:

• Carefully cut out a small 15mm section of old/damaged seal and push fit a similar length of the new seal to ensure you are happy with the new fit. The shape may vary but this should not adversely affect performance.
• Please note that the arrowhead is offset from the centre so you can fit it either way to provide the best seal.
• Remove the old seal by pulling or cutting it, make sure the groove is left as clean as possible; insert the arrowhead of the new seal.
• The new seal is pre-lubricated but if additional lubricant is required we recommend using a small amount of washing up liquid.
• Should the arrowhead be too loose in the groove then a small amount of silicone can be used to secure it into place.
• On some windows and doors a warping of the frame and closing leaf occurs; this means there is sometimes a larger gap to one corner.
• In such cases, as well as renewing the old seal in the groove, it may be worth fitting Stormguard Self-Adhesive Extra Thick Memory Seal (tolerance 3mm-8mm) onto the offending corner of the door or window leaf to ensure there is a good seal at the point of distortion too.