Black Stormguard UPVC Universal Replacement Bubble Seal Gasket (Per Metre)

Stormguard Replacement Gasket UPVC Seal Universal Draught Excluder Windows

Draughts and leaking UPVC windows and doors are a sure sign that your gasket may be worn or failing; over the years gasket will lose its flexibility, start to shrink and even disintegrate - this universal UPVC replacement seal by Stormguard is designed to fit virtually all UPVC Frames and once installed will save you both money and energy.

Please note: When buying multiples of 1m, the gasket will then be sent as one continuous length and not several 1m lengths, where possible.

Features:

• Push in easy to fit
• Replaces worn push in strips around UPVC/PVCu window frames
• Also suitable for UPVC/PVCu doors
• Black gasket seal

What's in the pack?

1 x 1 metre of Stormguard Replacement Gasket UPVC Seal

Dimensions:

Please refer to size chart.

Installation:

• Carefully cut out a small 15mm section of old/damaged seal and push fit a similar length of the new seal to ensure you are happy with the new fit. The shape may vary but this should not adversely affect performance.
• Please note that the arrowhead is offset from the centre so you can fit it either way to provide the best seal.
• Remove the old seal by pulling or cutting it, make sure the groove is left as clean as possible; insert the arrowhead of the new seal.
• The new seal is pre-lubricated but if additional lubricant is required we recommend using a small amount of washing up liquid.
• Should the arrowhead be too loose in the groove then a small amount of silicone can be used to secure it into place.
• On some windows and doors a warping of the frame and closing leaf occurs; this means there is sometimes a larger gap to one corner.
• In such cases, as well as renewing the old seal in the groove, it may be worth fitting Stormguard Self-Adhesive Extra Thick Memory Seal (tolerance 3mm-8mm) onto the offending corner of the door or window leaf to ensure there is a good seal at the point of distortion too.