Hoppe Ferco UPVC Door Handle Pair 70mm PZ 180mm Fixings

Upvc Door Handle 70PZ 70mm 180mm Screw Fixing Centres Lever/Lever Ferco Hoppe

The Hoppe London Evolution door handle set comes with a finish that is made to endure giving you years of use. During the last two decades we have supplied literally thousands of these handles without problem and are therefore confident in its performance. The Hoppe London door handles are ideal to suit older style multipoint locks with 70mm cylinder centres. The unsprung levers are fixed to the backplate and by design are fully reversible. Fixing lugs are supplied on the outer backplate for a secure fit.

This handle will Fit all Ferco 4.28, 5.28 & 6.35 door locks, these locks can easily be identified by looking at the stamp on the metal faceplate that runs the full height of the door.

Please note this is the shorter back plate length of 205mm with 180mm between screw holes, should you require the long back plate version of 245mm with 200mm between screw holes then please see our other listings in our shop.

Features:

• 70mm (critical dimension) from centre of handle spindle to centre of barrel
• Unsprung
• Supplied as a pair complete with spindle and screws
• Aluminium lever and backplate
• Universal handing, levers are fully reversible by design

Dimensions:

• 70mm (critical dimension) from centre of handle spindle to centre of barrel
• Backplate width: 27mm
• Backplate length: 205mm
• Lever length: 123mm
• Distance between screw hole centres: 180mm
• Will fit most older style door locks with 70mm centres
• For doors from 58 - 72mm thick
• Spindle Size: 7mm

What's in the pack?

1 x Set of Hoppe 70PZ Lever Handles

1 x Spindle

1 x Packet fixing screws

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 180mm) and the distance from the centre of the handle spindle to the centre of the barrel (this handle measures 70mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

This handle will Fit all Ferco 4.28, 5.28 & 6.35 door locks, these locks can easily be identified by looking at the stamp on the metal faceplate that runs the full height of the door.

What does un-sprung mean?

Un-sprung means the handle will use the door lock spring to return to position. There are a few door locks that will use a sprung handle to return the lever to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle.