Description
Round Centre Pull Door Knob Solid Brass Heavy Duty Large 70mm 2.75" Diameter
An impressive, large, heavy, solid brass, round design centre pull door knob. The design is simple and ageless and speaks volumes about the home owners quality of choice. This knob is normally fitted to the centre of a door at the mid rail height, but could be used as an accent piece in any position.
The centre pull door knob has a bolt through fixing for strength and stability.
With a choice of finishes this knob can span decades of historical facades and any one will look stunning adorning your front door.
Features:
- Bolt through method
- Solid brass construction
- Hand polished
- Fixings included
What's in the pack?
1 x Round Centre Pull Door Knob
1 x Fixings Pack
Dimensions:
- Knob Diameter: Ø 70mm
- Rose Diameter: Ø 50mm
- Height: 75mm (protrusion out from door)
- Width: 70mm
- Depth: 70mm
- Weight: 542g
- To Suit Door Thickness: Up to 75mm
All measurements are approximate.
Installation:
Tools required: Pencil, tape measure, electric drill and drill bit and spanner.
1: Select where you want to place the centre pull handle on your door. Using a pencil, measure and mark on the door where the knob will go.
2: With the electric drill and the correct sized drill bit, carefully drill a hole all the way through your door. Clean the hole so that it is free of dust and particles.
3: Place the door knob bolt through the hole, ensuring that the nut is on the inside of the door (trim to the correct length as necessary); place the knob and screw the bolt into your door knob securely. Use a wrench or spanner to gently tighten the bolt. (This knob comes with a detachable rose (Allen key included) so that the rose can be screwed (screws not included) to the door in addition to the bolt fixing if a more secure fit if required).
4: Wipe the door knob clean of any dust from the installation, stand back and admire your excellent work!
