Era Mortice Bathroom Door Lock Sash Lock

Era Bathroom Door Lock Sash Lock

The Era sashlock is specially designed for bathroom doors; it has a reversible bolt and along with the strikerplate can be used on both left and right handed and inwards and outwards opening doors. The sashlock features a deadbolt which can be operated by a thumbturn release catch.

The lock is available in 2 backset sizes (2.5 Inch and 3 Inch) and 2 colours (Brass and Chrome).

Please note: This sashlock is designed to be used with a thumbturn catch and is not a key locking system.

Features:

• Specially designed for bathroom doors
• Features a deadbolt which can be operated by a thumbturn release catch
• Suitable for internal timber doors
• Sashlock provided with wood screws
• Sashlock deadbolt can be used for left and right handed and inward and outward opening door
• Brass effect and chrome effect finishes available

What's in the Pack?

1 x Era Sash Lock

1 x Striker Plate

4 x Fixing Screws

Dimensions: Sashlock 64mm/2.5" & 76mm/3"

• Sashlock body length: 102mm ; body height: 64mm (76mm); body width: 14mm
• Backset: 64mm/2.5" (76mm/3")
• Sashlock faceplate length: 155mm; height: 2mm; width: 22mm
• Strikerplate length: 125mm; height: 2mm; width: 24mm
• Latch throw: 10mm; length: 18mm; width: 13mm
• Bolt throw: 12mm; length: 25mm; width: 9mm
• Spindle hole size: 8mm
• Screw fixing centres: 135mm
• Material: Brass or Chrome effect finish

All measurements are approximate. Numbers in brackets relate to the 3" version of this Sashlock.

What measurements should I check before ordering a sashlock?

*When buying a sashlock for your door handle it is important to work out the correct size. There are 6 important dimensions.

• A. Backset: Is measured from the centre of the square hole the handle spindle passes through to the front of the lock. Usually 44mm (for a 64mm (2½”) lock) & 56mm (for a 76mm (3”) lock).
• B. PZ Centres: This is measured from the centre of the lower spindle hole to the centre of the square hole the handle spindle passes through.
• C. Case Depth: The depth of the lock when routed into the door, measured from edge to edge. Typically in the UK case depths are generally either 64mm (2½”) and 76mm (3”).
• D. Case Height: The height of the lock case, measured from top to bottom. 
• E. Faceplate Length: The overall length of the faceplate (the part that is visible once the lock is fitted).
• F. Faceplate Width: The width of the faceplate (the part that is visible once the lock is fitted).

Important, please check the critical measurements in the diagram in the gallery before ordering.