Burg Wachter SA1180 Security Anchor GA3 Heavy Duty Hardened Steel

Burg Wachter SA1180 Security Anchor Hardened Steel Ground Wall Shed Bike Tools

The Burg Wachter SA1180 security anchor is a high security solution to secure your valuable items such as bikes, tools and garden equipment. The hardened steel plate is secured to the floor or wall by two m6 high security anchor bolts to ensure maximum strength and is ideal for use with chains and cables. The supplied bolts are protected by a hardened steel cover when in situ to protect from attack.

An additional bracket is provided, which is designed for shed mounting.

Sold Secure Certified & Police Approved

Tested and certified by Sold Secure to “Domestic Buildings Silver”, you can rest assured this ground anchor meets the strictest of security standards. It is also recognised and approved by the Police through “Secured by Design” – the official police security initiative that works to improve security through good product design.

Features:

• Sold Secure Domestic Building Silver
• Hardened steel plate
• Hardened shackle
• High security M6 anchor bolts
• Ideal for use with chains and cables
• Ideal for sheds
• Secures bikes, tools, garden equipment and much more

What's in the pack?

1 x Burg Wachter Security Anchor

2 x M6 Anchor Bolts

Dimensions:

• Depth: 53mm
• Width: 108mm
• Height: 55mm

Fitting Instructions:

Wall or floor mounted;

1. Using the anchor plate as a template, drill 2 holes using a 6mm drill bit
2. Remove the plate and widen the holes with a 12mm concrete bit to a depth of 55mm - 60mm
3. Remove the bolts from the anchor fixings. Place the bolts through the holes in the anchor plate and hand tighten
4. Insert the two anchor fixings into the prepared holes
5. Hold the plate firmly against the wall or floor and tighten
6. Press the top cover firmly over the anchor plate

Shed mounted;

1. Using the anchor plate as a template, drill 2 holes using a 6mm drill bit
2. From the outside, recess the backplate into the wood using a 12mm drill (can be to a depth of 10mm)
3. Place the bolts through the holes in the anchor plate and shed. Hand tighten into the backplate
4. Hold the anchor firmly to the shed and fully tighten the bolts
5. Press the top cover firmly over the anchor plate