Description
Avocet shoot bolt window gearbox in 20mm or 22mm backset, 180mm long with 43mm handle screw centres, to replace the centre gearbox on a uPVC window lock.
Avocet Shoot Bolt Window Lock Centre Gearbox is the centre part of an Avocet uPVC window lock. This Avocet shoot bolt window gearbox accepts shoot bolt extension rods, which run up and down the sash to lock the window into the frame. Choose the 20mm or 22mm backset to match the profile system used on your window.
On a shoot bolt lock it is usually the centre gearbox that fails, so you can normally reuse your existing rods and frame keeps. If you also need new extension rods or keeps, choose them from the options further down this listing.
Dimensions - Check It Fits:
Key sizes to check:
- Backset: 20mm (SBGB4) or 22mm (SBGB5)
- Overall length: 180mm
- Faceplate width: 16mm
- Handle screw centres: 43mm
Other sizes: Connector length 170mm · Gearbox case width 70mm · Fixing screw hole centres 130mm · Case height 33mm (20mm backset) · Case height 35mm (22mm backset)
Backset is measured from the centre of the handle spindle hole to the top of the side lip on the gearbox, as shown on our diagram. Measure the overall length end to end, and check the distance between the screw holes.
This will not fit if: your old gearbox has a backset other than 20mm or 22mm, handle screw centres other than 43mm, or fixing holes that are not 130mm apart.
The part numbers are not stamped on the gearbox, so go by your measurements. Remove your old gearbox and compare its sizes and shape with the product photos before ordering.
Key Benefits:
- Replace only the part that failed – the gearbox is sold on its own, so a window lock replacement does not usually mean new rods and keeps.
- Unhanded – the same gearbox suits left-hand and right-hand opening windows.
- Two backset sizes – 20mm and 22mm versions cover the two common profile depths, so you can match your existing lock.
- Standard 43mm handle screw centres – suits the 43mm screw centres used on uPVC window handles, so your current handle should line up.
- Accepts shoot bolt extension rods – the rods connect straight into the gearbox and lock the sash at the top and bottom.
Product Specifications:
- Brand: Avocet
- Avocet part number: SBGB4 (20mm backset), SBGB5 (22mm backset) – not stamped on the gearbox
- Type: uPVC window gearbox (centre gearbox for shoot bolt locks)
- Handing: Unhanded
- Finish: Silver
- Accepts shoot bolt extension rods: Yes
Pro Tips:
Pro Tip: Before you start a window mechanism replacement, open the window and photograph how each rod connects to the gearbox. Fit the new gearbox with the handle in the same position as the old one, so the rods line up with your existing keeps.
Tools you'll need: A cross-head screwdriver.
What's in the Pack:
- 1 × Avocet shoot bolt window lock centre gearbox (20mm or 22mm backset, as chosen)
Frequently Asked Questions:
Can I reuse my old shoot bolt rods and keeps?
Usually, yes. On a shoot bolt window lock it is normally the centre gearbox that fails, so the existing rods and frame keeps can stay.
Do I need the 20mm or 22mm backset?
Measure the backset on your old gearbox, from the centre of the handle spindle hole to the top of the side lip on the gearbox, as shown on our diagram. If it is 20mm, choose SBGB4; if it is 22mm, choose SBGB5. The 22mm version also has a slightly taller case, at 35mm against 33mm.
Will this replace my uPVC window locking mechanism?
It replaces the centre gearbox of a shoot bolt uPVC window locking mechanism. Check that your old gearbox is 180mm long, with a 16mm faceplate, 43mm handle screw centres and fixing holes 130mm apart. It is unhanded, so it fits left-hand and right-hand opening windows.
How do I fit an Avocet shoot bolt window gearbox?
Open the window, take off the handle and unscrew the old gearbox from the sash. Disconnect the shoot bolt rods, connect them to the new gearbox, screw it in place and refit the handle.
Specifications
Backset: |
20mm, 22mm |
