UPVC Composite Door Handle Sprung Modern Architectural 92mm 92PZ Double Glazing PVC Pair

The Architectural UPVC Handle by Fab & Fix has been professionally styled to complement a modern looking home. Its sculpted ergonomic lever allows for ease of use and enhanced smooth action, while its solid die-cast construction and heavy-duty spring cassette, adds durability. It has a wide backplate to accommodate cylinder guards.

Features:

• Suitable for PVCu, Timber, Aluminium and Composite doors
• Solid die-cast construction
• Heavy duty spring cassette
• 32mm wide backplate for new doors or replacing handles on existing doors
• Suits doors with a thickness of 44mm - 70mm
• Tested to meet the requirements of PAS 24 as part of a compliant door set
• Endurance tested in excess of 50,000 cycles
• Meets the requirements of BS EN 1670:2007 Grade 5 (480 hours) Corrosion Resistance

What's in the pack?

1 x Fab & Fix Architectural Door Handle

1 x 125mm Spindle

1 x 110mm Spindle

2 x 80mm Screws

2 x 55mm Screws

Dimensions

• PZ Centres: 92mm
• Spindle Size: 8mm
• Backplate width: 32mm
• Backplate depth: 12mm
• Backplate length: 240 mm
• Distance between screw hole centres: 211mm

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre and the distance from the centre of the handle spindle to the centre of the barrel. The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or unsprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An unsprung handle can be replaced with a sprung handle, however. if your existing handles are sprung they must be replaced with the same.