UPVC Door Handle Pair Sprung Lever Set 70mm 70PZ 180mm Fixings Ferco Schlosser

The Ferco 70PZ sprung door handle is a versatile and reliable solution for enhancing the security and aesthetics of your home. Specifically designed to fit Ferco 4.28, 5.28, and 6.35 door locks, these handles are easily identifiable by the stamp on the metal faceplate that extends the full height of the door. The Schlosser Technik Apto 70mm PZ Door Handle stands out with its unique, patent-protected design tailored for Ferco multi-point door locks. Its highly durable finish ensures a perfect match with other door products, creating a coordinated and stylish door suite.

The Ferco Apto 70mm handle is equipped with spring cassettes that ensure it returns to an aesthetically pleasing 90-degree position when released. Built to endure, this handle has been corrosion tested to 480 hours based on BS EN 1670 standards and cycle tested to 50,000 cycles, guaranteeing long-lasting performance. The 70mm dimension from the centre of the handle spindle to the centre of the barrel fits most older style door locks with 70mm fixing centres. Each pair is supplied with a spindle, spring cassettes, and two sets of fixing screws, making it a comprehensive and robust solution for any door.

Features:

• Universal handing, to suit left-hand and right-hand opening doors
• Sprung 70mm door handle to suit Ferco locks
• Will fit most older style door locks with 70mm fixing centres
• Colour co-ordinated screw fixings
• Corrosion tested to 480 hours based on BS EN 1670
• Cycle tested to 50,000 cycles.

What's in the pack?

1 x Ferco 70 PZ UPVC door handle set

1 x 7mm Spindle

2 x Sets of fixing screws

2 x Spring Cassettes

Dimensions:

• PZ Centres: 70mm (important dimension) from centre of handle spindle to centre of barrel
• Backplate width: 28mm.
• Backplate length: 205mm.
• Lever length: 124mm.
• Distance between screw hole centres: 180mm
• For doors from 58 - 72mm thick.
• Spindle Size: 7mm

All measurements are approximate. Please refer to the diagrams in the gallery.

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 180mm) and the distance from the centre of the handle spindle to the centre of the barrel (this handle measures 70mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

This handle will Fit all Ferco 4.28, 5.28 & 6.35 door locks, these locks can easily be identified by looking at the stamp on the metal faceplate that runs the full height of the door. Please check the critical measurements before ordering.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An un-sprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.