GreenteQ Alpha UPVC Door Handle Pair 92mm 215mm Fixings

UPVC Door Handle GreenteQ Alpha 92 PZ Sprung Double Glazing Pair 92mm Set PVC

The GreenteQ Alpha Door Handle has been designed with aesthetics, ease of use and durability in mind. The handle is fully sprung and available in a 250mm backplate (215mm fixings). This backplate is ideal for use on double spindle locks such as Roto and Yale. This handle has been styled to match the other items in the GreenteQ range complementing them perfectly.

The handle is supplied with spindles and M6 screws of varying sizes which fits doors (all materials) between 44mm to 72mm thick.

Features:

• Non-handed, levers are fully reversible
• Fully sprung
• Fits doors between 44mm to 72mm thick.
• Comfortable to use lever
• Flange around cylinder hole hides unsightly gaps
• M6 screws for added strength
• Easy to fit

What's in the Pack? (215mm Fixings)

1 x Set of GreenteQ Alpha 92PZ Door Handles

1 x 120mm Spindle

1 x 135mm Spindle

2 x 55mm Reinforced M6 Screw

2 x 80mm Reinforced M6 Screw

Dimensions: (215mm Fixings)

• PZ Centres: 92mm critical dimension from centre of handle spindle to centre of barrel (the most common size)
• Spindle Size: 8mm
• Backplate width: 32mm
• Backplate depth: 11mm
• Backplate length (long backplate) : 250mm
• Distance between screw hole centres (long backplate): 215mm
• Fits 44mm to 72mm thickness

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 215mm) and the distance from the centre of the handle spindle to the centre of the barrel (this handle measures 92mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

Important please check the critical measurements in the diagram in the gallery before ordering.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An un-sprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.