Upvc Door Handle 70PZ 70mm 200mm Screw Fixing Centres Lever/Lever Ferco Hoppe

The Hoppe Ferco door handle set comes with a finish that is made to endure giving you years of use. During the last two decades we have supplied literally thousands of these handles without problem and are therefore confident in its performance. The Hoppe Ferco door handles are ideal to suit older style multipoint locks with 70mm cylinder centres. The unsprung levers are fixed to the backplate and by design are fully reversible. Fixing lugs are supplied on the outer backplate for a secure fit. The levers are manufactured in cast aluminium, the radiused aluminium back-plate comes with a stainless steel under construction for superior strength.

Please note this is the longer 245mm backplate version with 200mm screw hole spacing's, should you require the short back plate version of 205mm with 180mm between screw holes then please see the other listing in our shop.

You may want to update your existing cylinder locks at the same time as replacing your handle. Available in our shop is a range of locks to suit all budgets including Anti Snap, Anti Bump, Keyed Alike & Thumb Turns..

Features:

• 70mm (critical dimension) from centre of handle spindle to centre of barrel 200mm between screw holes
• Supplied as a pair complete with spindle and screws
• Universal handing, levers are fully reversible by design
• Unsprung

What's in the pack?

1 x Set of Hoppe 70PZ Lever Handles Long back plate 245mm

1 x Spindle

1 x Packet Fixing Screws

Dimensions:

• 70mm (critical dimension) from centre of handle spindle to centre of barrel
• Distance between screw hole centres: 200mm
• Spindle size: 7mm x 130mm
• Screws: 2 x 80mm
• Backplate width: 30mm.
• Backplate length: 245mm
• Lever length: 121mm.
• Will fit older style door locks with 70mm centres.

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre (this handle measures 200mm) and the distance from the centre of the handle spindle to the centre of the barrel (this handle measures 70mm). The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

Important please check the critical measurements in the diagram in the gallery before ordering.

What does un-sprung mean?

Un-sprung means the handle will use the door lock spring to return to position. There are a few door locks that will use a sprung handle to return the lever to position. The easiest way to determine if you need a sprung or un-sprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle.