Trojan Cockspur Window Handle Sparta

The Sparta Cockspur is a popular contemporary design with superb ergonomic styling for UPVC, aluminium and timber window applications. Designed with a slender grip, it makes this handle easy to use and a pleasure to look at. This Cockspur handle has been engineered with a simple release button and locking cylinder for ease of use and long term performance.

The Cockspur window handle nose locates and locks over a plastic striker plate fixed to the frame. Locking automatically on closing, the handle may be simply released by depressing the button, or deadlocked for added security. The Sparta Cockspur is a traditional locking solution for windows offering security, performance and adaptability.

Features:

• 15.5mm backset
• Push to open
• Key lockable
• Supplied with key, screw cover cap and push fit conversion cover
• Material: Zinc Alloy
• Plastic Parts: Nylon 66, UV stabilised ABS and Acetal
• Corrosion Resistant to BS EN 1670
• Painted Finish: Grade 5
• Cycle tested to 25,000 under operational load

What's in the pack?

1 x Cockspur Handle

1 x Key

1 x Screw Coverplate

1 x Push Fit Cover (to convert to non locking)

Dimensions:

Distance between screw holes - 50mm (outer holes), 30mm (inner holes)

Please see diagram in gallery.

What do I need to check before ordering a handle?

Left or Right Hand?

First check the hand of your handle, for a top hung window that opens out - if the long part of the handle points to the left and the little spur points down you will need a left hand, if the long part of the handle points to the right and the little spur points down you will need a right hand. For side opening windows - if the long part of the handle points down and the little spur points to the right then you need a left hand handle, conversely if the long part of the handle points down and the little spur points to the left then you need a right hand handle. Please see image in gallery.

Which backset will I need?

To measure the backset (stack height) you will need to measure from the baseplate (the part that sits flat against the window) to the underside of the handle nose (please see measuring guide).

How to remove and replace a Cockspur window handle:

• Remove the screw cover cap to reveal two screws, unscrew and remove
• Move the handle to the open position which will show another two screws, remove as before
• Once all four screws have been removed the handle should come off
• Replace by lining up the new handle with the old screw holes
• Put the new screws in and secure into place
• Once the screws at the top and bottom of the base are fitted put the screw cover (if applicable) over the screw hole at the top of the base