Description
Stormguard Aquacarrier Qlon Around Door Draught Excluder Seal Kit — 5 x 1050mm
Stop draughts with the Stormguard Aquacarrier Qlon door seal kit — seals gaps up to 10mm, 5 x 1050mm lengths, fully trimmable, with pins included.
Stormguard Aquacarrier Qlon Draught Excluder is the complete around-door draught excluder set for external, inward-opening doors. If cold air, noise, or moisture is getting in around your door frame, loft hatch, or inward-opening window, this kit gives you everything you need to fix it without calling in a tradesperson. The Q-Lon seal is factory-fitted into a rigid plastic carrier profile that pins directly to the outside of the frame — compressing against the door or hatch on closing to seal gaps of up to 10mm and restore a draught-free fit.
Stormguard is a trusted name in door and window sealing solutions, and the Aquacarrier range reflects that reputation. Each length is designed for straightforward pin-fixing directly to the frame rebate, and every piece is fully trimmable so you get a precise, clean fit regardless of your door or hatch size.
Key Benefits for Draughty Door, Window & Loft Hatch Owners:
- Seals Gaps Up to 10mm – The Q-Lon gasket compresses on contact to close even wider gaps around older door and window frames, stopping cold air, noise, and moisture from getting through where it shouldn't.
- Reduces Heat Loss & Heating Bills – Eliminating draughts around your door frame or loft hatch helps retain warmth in your home — a simple, low-cost fix that pays for itself over a single winter.
- Hard-Wearing Q-Lon Gasket – Q-Lon is a market-leading draught seal material, chosen for its resilience and long service life. It maintains its shape and sealing performance through thousands of door cycles without cracking or flattening out.
- Fully Trimmable to Length – Each 1050mm length can be cut to size with scissors or a craft knife, giving you a neat, precise fit on any standard door frame, loft hatch, or window frame without waste.
- Simple Pin-Fix Installation – No adhesives or specialist tools required. The rigid carrier profile pins directly to the outside of the frame rebate using the pins provided, holding the Q-Lon seal in precise, consistent contact with the door — a straightforward DIY job you can complete in under an hour.
- Versatile Kit — One Purchase, Multiple Uses – Five lengths per pack gives you enough to tackle a standard door perimeter in a single purchase, with lengths to spare for a loft hatch or window. No need to buy separate pieces or run out midway through a job.
Product Specifications:
- Brand: Stormguard
- Product Range: Aquacarrier Qlon
- Seal Type: Q-Lon gasket (factory-fitted into rigid plastic carrier profile)
- Individual Length: 1050mm per piece
- Pack Quantity: 5 lengths
- Total Seal Length: 5250mm (5.25m)
- Maximum Gap Sealed: Up to 10mm
- Carrier Width: 12mm
- Carrier Height: 6mm
- Total Width: 25mm
- Seal Bulb Depth: 14mm
- Fixing Method: Pin-fixed
- Trimmable: Yes — cut to length with scissors or craft knife
- Door Type: External, inward-opening doors
- Fixing Position: Outside of door frame
- Application: Around-door frame rebate, inward-opening windows, loft hatches
Please measure the gap around your door frame before ordering to confirm this product is suitable for your application. If in doubt, contact us and we'll be happy to advise.
Pro Tips:
Pro Tip: For correct compression, position the carrier so that the outer face of the profile sits approximately 4mm away from the door surface when the door is closed. Too close and the door will catch; too far and the seal won't compress fully. Mark the position with the door closed before opening it to pin the carrier in place — this takes the guesswork out of getting the contact pressure right first time.
Package Contents:
- 5 × Stormguard Aquacarrier Qlon Draught Seal (1050mm lengths)
- 1 × Pack of Securing Pins
Frequently Asked Questions:
Is the Stormguard Aquacarrier suitable for my door type?
The Aquacarrier is designed for external, inward-opening doors and is fixed to the outside of the door frame. It seals gaps of up to 10mm between the door and its frame. If you have an outward-opening door or an unusual frame configuration, contact us before ordering and we'll advise on the most suitable seal.
Can I use the Aquacarrier on windows or a loft hatch?
Yes — the Aquacarrier works well on inward-opening windows and loft hatches in addition to doors. It pins to the outside of the frame rebate and relies on the sash, hatch, or door pressing against the Q-Lon seal on closing, so it is not suitable for outward-opening applications.
How much total seal length does this pack provide?
The pack contains 5 lengths of 1050mm, giving you a total of 5250mm (5.25 metres) of draught seal. This is typically sufficient to cover the full perimeter of a standard single door, with lengths to spare for a loft hatch or window.
Does this kit include everything I need to fit it?
Yes — a pack of securing pins is included alongside the five seal lengths, so no additional fixings are required. No adhesives or specialist tools are needed for a standard pin-fix installation.
Why Choose the Stormguard Aquacarrier Qlon Draught Excluder?
Draughts around a door frame are one of the most common causes of heat loss in UK homes — and one of the easiest to fix. The Stormguard Aquacarrier Qlon kit uses genuine Q-Lon gasket material, factory-fitted into a rigid carrier profile — the same seal specification relied upon by window and door manufacturers across the industry. Customers regularly use it across front doors, back doors, loft hatches, and inward-opening windows, making it one of the most versatile draught sealing solutions available. It isn't a temporary fix; correctly fitted, it will keep draughts out season after season without the cost of a full frame replacement.
At JCP Hardware, we've supplied replacement seals and door hardware to homeowners and trade professionals across the UK for over 30 years. If you're unsure whether the Aquacarrier is right for your door, window, or hatch, get in touch — we're always happy to help you find the correct fit first time.
Item specifics
Height: |
6mm |
Length: |
1050mm |
Seals Gaps: |
1mm - 10mm |
Type: |
Draught Excluder |
Width: |
25mm |
Product Reviews
Delivery & Returns
Our Commitment to Fast, Reliable & Hassle-Free Service
We aim to deliver your products as quickly as possible.
Cut-off times:
- Orders placed before 2:00pm are normally dispatched the same day.
- Orders placed after 2:00pm on Friday are dispatched the following Monday.
Depending on the delivery service selected at checkout, we use Royal Mail Tracked 24 or a next-day courier service.
Free Shipping
Free shipping is available for all orders over £10.00. Estimated delivery time for free shipping is 1–2 working days.
No Quibble Money Back Returns Policy
Shop with absolute confidence. If you are not satisfied for any reason, we will refund the full purchase price provided the item is returned within 60 days in the same condition as dispatched.
Except where an item proves to be faulty, damaged on delivery, or incorrectly described, return delivery charges and postage expenses are not refunded.
How do I return items?
- Log into your account and click on the Orders tab.
- Find the order you wish to return and click “Return Items?” on the right.
- On the Returns tab:
- Enter the quantity you wish to return (right side).
- Select the return reason and return action (replacement or refund) under the item.
- If a replacement is not available, a refund will be issued.
- Use the comments box for any additional details.
- Click “Submit Return Request”.
You will then receive a return request email from JCP Hardware with instructions.
If you placed an order as a guest and wish to return it, then please email.
