Description
ERA Laird Saracen Surelock Door Lock Gearbox 35mm Backset
This is a replacement gearbox for Era, Laird, Saracen Surelock & Fab n Fix multipoint locks and has a back set of 35mm (measurement from handle spindle centre to front of lock faceplate). This is the part that is most likely to be at fault when a lock fails and becomes unusable. Replacing the gearbox is cost effective as it saves having to buy a complete new lock and it is quite easily achieved.
These Era manufactured gearboxes with fit many brands such as Era, Laird, Saracen Surelock & Fab n Fix multipoint locks, as always taking careful measurements will ensure a correct fit. The latch is easily adaptable to fit both left and right handed doors, it is designed for use with lever/lever handles but the addition of a split spindle will also allow for a lever/pad operation.
Available with a standard (6.75mm) or narrow (5.75mm) Deadbolt
Features:
- Latch and Deadlock
- Fully reversible latch
- Lever/ Lever or Lever/Pad operation with the addition of a split spindle
- Non Handed - fits both left and right handed doors
What's in the pack?
1 x ERA Saracen Surelock Gearbox 92PZ/35mm with choice of standard or narrow deadbolt.
Dimensions:
- Lock case length: 219mm
- Lock case depth: 50mm
- Lock case width: 15mm
- Centre of latch to centre of deadbolt: 87.5mm
- Deadbolt throw: 20mm
- Deadbolt width: 29.9mm
- Deadbolt thickness: 6.75 or 5.75mm
- Distance between faceplate screw holes: First to second screw hole 43mm - Second to third screw hole 85.5mm
- PZ Centres: 92mm
- Backset: 35mm
What should I check before ordering a new door lock?
The most important measurements are the lock Backset and the lock handle centres (the distance from the centre of the handle spindle to the centre of the barrel).
Please remember to check your gearbox against all of the measurements (you will need to remove the lock from the door to get accurate measurements).
The centre latch is non-handed, it can easily be reversed by following the instructions below.
How do I reverse the latch?
- Undo the two screws located in the end of the latch.
- Rotate the latch 180°.
- Slide the latch back in.
- Replace and tighten screws.
Item specifics
Backset: |
35mm |
PZ: |
92mm |
Spindle: |
Single |
Product Reviews
Delivery & Returns
Our Commitment to Fast, Reliable & Hassle-Free Service
We aim to deliver your products as quickly as possible.
Cut-off times:
- Orders placed before 2:00pm are normally dispatched the same day.
- Orders placed after 2:00pm on Friday are dispatched the following Monday.
- For Premium Tracked 24 delivery, please order before 12:00pm for same-day dispatch.
Depending on the delivery service selected at checkout, we use a next-day courier service, Royal Mail Tracked 48, or Royal Mail Tracked 24.
Free Shipping
Free shipping is available for all orders over £10.00. Estimated delivery time for free shipping is 3–5 working days.
No Quibble Money Back Returns Policy
Shop with absolute confidence. If you are not satisfied for any reason, we will refund the full purchase price provided the item is returned within 30 days in the same condition as dispatched.
Except where an item proves to be faulty, damaged on delivery, or incorrectly described, return delivery charges and postage expenses are not refunded.
How do I return items?
- Log into your account and click on the Orders tab.
- Find the order you wish to return and click “Return Items?” on the right.
- On the Returns tab:
- Enter the quantity you wish to return (right side).
- Select the return reason and return action (replacement or refund) under the item.
- If a replacement is not available, a refund will be issued.
- Use the comments box for any additional details.
- Click “Submit Return Request”.
You will then receive a return request email from JCP Hardware with instructions.
If you placed an order as a guest and wish to return it, then please email.
