68Pz Fullex Valencia Lever/Lever Door Handle Hoppe Resista 10 Year Guarantee

This Hoppe Valencia lever is set on a backplate for exterior doors and suits Fullex multipoint locks. The sprung levers are fixed to the backplate and by design the handles are fully reversible. Fixing lugs are supplied on both backplates for a secure fit. Supplied with fixing screws, spring return cassettes and spindle to suit door thickness up to 70mm.

Covered by Hoppe's Resista ® 10 year surface guarantee, these handles are made to withstand large volumes of use making them ideal for hotels, shops and public buildings and for those homeowners that live in coastal regions or areas of high pollution. Products with the Resista ® surface guarantee have undergone continual quality testing and, when new, conform to the requirements of the European standard BS EN 1670:1998 ("Building hardware - corrosion resistance - requirements and test method").

We recommend updating your existing cylinder locks at the same time as replacing your handle to ensure maximum security. We supply a range of locks to suit all budgets including Anti Snap, Anti Bump, Keyed Alike & Thumb Turns. To purchase a cylinder, please refer to our shop.

Features:

• Universal handing, levers are fully reversible by design.
• Sprung version as standard Compatible with Fullex Locks
• Tested to over 200,000 cycles
• Supplied as a pair complete with spindle and screws.

What's in the pack?

1 x Hoppe Chrome Lever/Lever Door Handle Internal and External Handle

1 x Spindle

2 x Spring Cassettes

2 x Fixing Screws

Dimensions:

• PZ Centres: 68mm
• Backplate width: 30mm
• Backplate length: 245mm
• Distance between screw hole centres: 215mm
• For doors from 60mm - 70mm thick
• Spindle Size: 8mm
• Lever Length: 110mm

Please see diagram in gallery.

What measurements should I check before ordering a handle set?

The most important measurements are the distance between screw holes centre to centre and the distance from the centre of the handle spindle to the centre of the barrel . The length and width of the handle are less critical as a slightly shorter or longer handle should make no difference.

What does sprung mean?

Sprung means a spring is fitted to the door handle to return the handle to position. The easiest way to determine if you need a sprung or unsprung handle is to first remove your handle, then operate the lever to see if there is a return spring fitted to the handle. An unsprung handle can be replaced with a sprung handle, however if your existing handles are sprung they must be replaced with the same.